PLEASE ALL replies Must include call-back
PHONE Number IN either voicemail, email,
or text. Otherwise I will delete.
Maintenance Platform -- pentle-towable-rolling Asking $650
Made by Reatckinson Co.
Type = either R1 or B1 (uncertain)
Serial = 4706-0?05
Load Capacity = 500 lbs.
Platform Height fully Raised = 13-1/2 feet ( removable via 4 pivot pins )
Overall Height fully Raised = 204 in. = 17 ft. ( top of rails )
Axle-Axle length = 147 in.
Overall length fully lowered = ( 196-in. + 31-in. for pentle bar - removable )
Wheelbase width at street tires = 57 in.
Tires -- 6.90-9, 1120 lb. load capacity. pressure 60 psi
appear to be serviceable with excellent tread
Stabilizing Outriggers, two, both hand cranked, work smoothly
center to center spacing = 60 in.
Stabilizing discs/feet = 12 in. diameter
Stairs = 12 -- made of diamond wire mesh on angle-iron frames
Tread height / spacing = 12 in. except first is 13 in.
Platform is 13th step
Overall height = 15 feet ( RAM fully extended straight up )
Lowered height to top of platform = ( 46-in. to top of platform + 42-in. for removable rails )
Railing around platform:
height = 42 in.
width = 42 in. inside, overall width = 49 in.
depth = 45 in. inside, overall = 48 in.
moderate rust all around, need sand blasting and repaint
Rails around platform ( removable) serviceable
Rails along stairs (all removable) need rebuilding -- have all pieces for patterns as needed
the pipes with the pivoting joint ends are all serviceable
need only to replace some connector pipes and two pins ( 1-in. diam x 5-in. long solid steel ) ( two missing ) -- platform is removable -- held by 4-pins (allow pivoting of stair rails)
The Hydraulic system is sound. Does not leak. ( The stains on the trailer are from previous cargo.)
Safety Lock is attached by
short chain -- locks the RAM into desired raised position
call Weldon @ 760 994-7734
can SEE All my postings on Craigslist by entering the search term 'weldon' (my name) without the marks